Cadet RBF Series Instrukcja Użytkownika Pobierz pdf

MODELS:

RBF101

(Supersedes RB Models; RB101 & RB121)

Features & Benefits

■ Primary and Secondary Thermal

Safeguards

• Commercial grade high temperature

manual reset

• Over-temperature one-time thermal

device

■ Nichrome element wrapped around

mica insulators for durability

■ Powder coat paint process eliminates

sharp cutting edges

■ Stainless steel grill and frame

■ Convenient ON-OFF rocker switch

control

■ Two year extended warranty

■ Wall can designed for bottom wiring

and ease of installation

■ Factory tested and UL listed

■ Retrofits into model RBC wall can

WARNING

Turn the electrical power off at the electrical

panel board (circuit breaker or fuse box) and lock

or tag the panel board door to prevent someone

from turning on power while you are working on

the heater. Failure to do so could result in serious

electrical shock, burns, or possible death.

SAVE THESE INSTRUCTIONS

1. Read all instructions and information labels. Verify the

electrical supply wires are the same voltage as the

heater.

2. All electrical work and materials must comply with the

National Electric Code (NEC), the Occupational Safety and

Health Act (OSHA), and all state and local codes.

3. The heater must be grounded to the grounding pigtail

(copper wire) provided in the wall can.

4. If you need to install a new circuit or need additional

wiring information, consult a qualified electrician.

5. Protect electrical supply from kinks, sharp objects, oil,

grease, hot surfaces or chemicals.

6. WARNING

DO NOT install the heater in a floor, ceiling, or behind

doors. Overheating or fire may occur.

7. WARNING

DO NOT install heater in any area where combustible

vapors, gases, liquids, or excessive lint or dust are pre-

sent. Fire or explosion may occur.

8. WARNING

Risk of Electrical Shock. Connect grounding lead to

grounding wire provided. Keep all foreign objects out of

heater.

9. WARNING

Risk of Fire. Heater must be kept clear of all obstructions: a

minimum of 3’ in front, 6” above and on both sides.

Heaters must be kept clean of lint, dirt and debris. (See

Maintenance Instructions)

IMPORTANT INFORMATION

Tools Required:

Phillips Screwdriver

Straight Screwdriver

Wire Strippers

Utility Knife

4 1

⁄2" Wood Screws

3 Insulated Wire Connectors

1 Strain Relief Connector

OWNER’S GUIDE

The RBF Series

TEL: 360-693-2505 Fax: 360-694-6939 P.O. Box 1675 Vancouver, WA 98668-1675

1 2 3 4

Podsumowanie treści

Strona 1 - The RBF Series

MODELS: RBF101 (Supersedes RB Models; RB101 & RB121)Features & Benefits Primary and Secondary ThermalSafeguards• Commercial grade high temper

Strona 2 - How do I install in

Part TwoInstallation InstructionsPLACEMENT: UL approved for vertical installation only.CONTROL OF HEATER: ON-OFF control built into product.How do I i

Strona 3 - Installation Instructions

Installation InstructionsWARNINGRisk of ElectricalShock. Connectgrounding lead togrounding wireprovided. Keep allforeign objects outof heater.WARNINGR

Strona 4 - Troubleshooting Chart

LIMITED ONE-YEAR WARRANTY: Cadet Manufacturing Co. will repair or replace anyCadet product, including thermostats, found to be defective or malfunctio