Cadet RBF Series Instrukcja Naprawy Pobierz pdf

The RBF Series

MODELS:

RBF101 (Supersedes Models RB101 & RB121)

Features & Benefits

■

Retrofits into model RBC wall can or use

with wall can model RBFC

■

Primary and Secondary Thermal Safeguards

•

Robust, heavy duty high temperature

manual power reset

•

Over-temperature one-time thermal fuse

■

Nichrome element wrapped around mica

insulators for durability

■

Powder coat paint process eliminates sharp

cutting edges

■

Stainless steel grill and frame

■

Convenient ON-OFF rocker switch control

■

Two year extended warranty

■

Factory tested and UL listed

WARNING

Turn the electrical power off at the electrical

panel board (circuit breaker or fuse box) and lock

or tag the panel board door to prevent someone

from turning on power while you are working on

the heater. Failure to do so could result in

serious electrical shock, burns, or possible death.

SAVE THESE INSTRUCTIONS

1. Read all instructions before using this heater.

2. Read all information labels. Verify that the electrical supply

wires are the same voltage as the heater.

3. All electrical work and materials must comply with the

National Electric Code (NEC), the Occupational Safety and

Health Act (OSHA), and all state and local codes.

4. Connect the grounding screw provided in the wall can to the

supply ground wire.

5. If you need to install a new circuit or need additional wiring

information, consult a qualified electrician.

6. Protect electrical supply from kinks, sharp objects, oil,

grease, hot surfaces or chemicals.

7. WARNING!

Overheating or fire may occur. DO NOT install the heater in

a floor, ceiling, or behind doors.

8. WARNING!

Fire or explosion may occur. DO NOT install heater in any

area where combustible vapors, gases, liquids, or excessive

lint or dust are present.

9. WARNING!

Burn Hazard. This heater is hot when in use. To avoid burns,

do not let bare skin touch hot surfaces. Use extreme caution

when any heater is used by or near children or invalids.

10. WARNING!

Risk of Electrical Shock. Connect grounding lead to grounding

screw provided. Keep all foreign objects out of heater.

11. WARNING!

Risk of Fire. Do not block heater. Heater must be kept clear of

all obstructions: a minimum of 3 feet in front, 6 inches above

and on both sides. Heater must be kept clean of lint, dirt and

debris. (See Maintenance Instructions).

12. Use this heater only as described in this manual. Any other

use not recommended by the manufacturer may cause fire,

electrical shock, or injury to persons.

IMPORTANT INSTRUCTIONS

O WNER’S GUIDE

www.cadetco.com Tel: 360-693-2505 P.O. Box 1675 Vancouver, WA 98668-1675

TOOLS REQUIRED:

•

Phillips Screwdriver

•

Straight Screwdriver

•

Wire Strippers

•

Utility Knife

•

Insulated Wire Connectors

1 2 3 4 5 6 7 8 9 10

Podsumowanie treści

Strona 1 - The RBF Series

The RBF SeriesMODELS:RBF101 (Supersedes Models RB101 & RB121)Features & Benefits Retrofits into model RBC wall can or usewith wall can model R

Strona 2

MantenimientoPara lograr una operación más eficaz y segura y prolongar la vida útildel calentador, lea la Guía del propietario y siga las instruccione

Strona 3 - Installation Instructions

2Part TwoInstallation InstructionsPLACEMENT:UL approved for vertical installation only.CONTROL OF HEATER:ON-OFF control built into product.How do I in

Strona 4

Installation InstructionsA. WARNING! Before removing grill, turn the electricalpower off at the electrical panel board (circuit breaker or fusebox).

Strona 5 - Troubleshooting Chart

WARNINGRisk of ElectricalShock. Connectgrounding lead togrounding screwprovided. Keep allforeign objects outof heater.WARNINGRisk of Fire.Heater must

Strona 6

MaintenanceFor more effective and safer operation and to prolong the life of theheater, read the Owner’s Guide and follow the maintenance instructions

Strona 7 - ¡IMPORTANTE!

MODELOS:RBF101 (supedita los modelos RB101 y RB121)Características y Beneficios Calza en la cámara de pared del modelo RBC o bien puede usarlo con la

Strona 8 - Figura 3

8Parte dosInstrucciones para la instalaciónUBICACIÓN: Aprobado por UL sólo para instalación vertical.CONTROL DEL CALENTADOR: Control de ENCENDIDO-APAG

Strona 9 - Diagrama de

Instrucciones para la instalaciónA. ¡ADVERTENCIA! Antes de quitar la rejilla, desconecte laelectricidad en el tablero del panel eléctrico (cortacircu

Strona 10 - Garantía

ADVERTENCIARiesgo de electrocución.Conecte el conductor a tierraal tornillo de puesta a tierra suministrado. Evite que entrenobjetos extraños al calen